DC12V Digital Thermostat Temperature Alarm Controller Sensor Meter Blue LED

DC12V Digital Thermostat Temperature Alarm Controller Sensor Meter Blue LED

Status: In stock
RM 31.00
Payment on delivery
Van chuyen don gianSimple shipping
San pham chat luong High quality products
Ban hang toan quoc Nationwide sales
Thanh toan khi nhan hang Simple shipping

  • Control Temp Range: -50-120℃
  • Power Requirement: DC/AC 12V
  • Resolution: 0.1℃
  • Relay Output: 1 way
  • Rated Current: 10A
  • Control Accuracy: 0.1℃
  • Hysteresis Accuracy: 0.1℃

Features: -Can select cooling or heating working mode -Hysteresis setting, for example, environment temp is 30℃, the setting temp is 25℃, the hysteresis setting temp is 2℃, when cooling reach to 23℃, relay off and cooler off, then temp go up to 25℃, the relay on and cooler start -Set highest/ lowest upper limit temp to avoid accident -Temperature calibration, you can calibrate temp according to requirement -Temp (after) = temp (before) + correction value -Turn on/ off button tone -Delay start to protect your device -High temp alarm, when measure temp reach to the setting temp, controller will alarm -Restore factory settings, when the setting value is confusion, please restore factory settings Specifications: Control Temp Range: -50-120℃ Power Requirement: DC/AC 12V Resolution: 0.1℃ Measuring Input: NTC(10k 0.5%) waterproof sensor 0.5m Relay Output: 1 way Rated Current: 10A Control Accuracy: 0.1℃ Hysteresis Accuracy: 0.1℃ Refresh Time: 0.5s Power consumption: Static current<=35MA, attract current: <=65MA Display Type: 0.28" 3 digits display tube Environmental Requirement: -10-60℃, humidity: 20-85% Size: Approx. 10cm x 4.5cm x 2.5cm How to use: Connect DC/ AC12V power and the load Setting the desires temp: 1. Press the SET button, the LED flash the temperature 2. Press +- button to change the temperature value 3. Press SET to save and exit after setting successfully. or no operation 10s, temp save and exit Select code(woring mode): Long press SET button about 5s, will enter setting mode.press ENT button to save and exit. Long press ENT button to power off 1. Select code P0:long press SET button 5s, the led display P0, then press SET button.set cooling or heating mode 2. Select code P1...P8: long press SET button 5s, the led display P0, then press +- button to change working mode 3. Press SET to save and exit after setting successfully. or no operation 10s the value will be saved and exit

Specifications of DC12V Digital Thermostat Temperature Alarm Controller Sensor Meter Blue LED

  • Brand
    Not Specified
  • SKU
    NO037HLAA6UFE2ANMY-14253507
  • Warranty Type
    No Warranty
  • Model
    Freebang-SKU411565
What’s in the box
  • 1 x DC12V Digital Thermostat Temperature Alarm Controller Sensor Meter Blue LED


Official delivery unit


Understanding the importance of safe and secure shopping, we provide our customers with a broad range of secure payment options including cash-on-delivery, where you pay in cash only when you receive your package. Be assured of product quality and authenticity: All purchases on Website are guaranteed to be genuine products, new, not defective or damaged. If it is, simply return it within 14 days for a full refund under our Buyer Protection Program.

Delivered by Malaysia Post - Nationwide Sales - Payment Upon Delivery - Free Returns

Evaluate
Average rating
0
0 nhận xét
5 star
19 Very pleased
4 star
14 Satisfied
3 star
5 Normal
2 star
0 Below average
1 star
0 Disappointed
14500 Li-Ion Battery 800mAh 3.7V

14500 Li-Ion Battery 800mAh 3.7V

SKU: 275841

RM 6.50

Tag:
*

Back to top